-40%
Audio & Design DMA2 Preamp with Digital & Analog Outputs
$ 158.4
- Description
- Size Guide
Description
Audio & Design DMA2 Preamp with Digital & Analog OutputsDMA2 preamp in excellent condition, professionally modded to include analog outputs! This is an all-in-one two-channel preamp with clean, transparent sound, tremendous headroom, and 96kHz/24-bit digital converters and AES digital outputs built in, PLUS great-sounding analog outputs. I have lots of other clean preamps so need to move this one along. This preamp, which sells for 0. at Adorama (WITHOUT analog outputs), sounds much more refined than its price point might indicate. Only the preamp and a power cable are included. Thanks for looking!
Adorama listing: https://www.ebay.com/itm/333639147116?hash=item4dae715e6c:g:6owAAOSwZRhgjQ2h
Audio & Design DMA2 2 Channel Digital Mic Amplifier with AES Shuffling/RS232 Control, 120dB Dynamic Range, >10K Input Impedance
The Audio & Design DMA2 2 Channel Digital Mic Amplifier has two independent low noise microphone inputs which can be routed through to a single AES output. The unit can be locked to an external AES sync input. Analogue gain for each input channel is set by front panel push button switches. LEDs indicate digital headroom. Front panel switches also set 48v phantom powering, phase reverse and high pass filters for each channel. Full remote control of the front panel functions can be accessed via RS232 or optional RS485 port.
Audio & Design DMA2 Features:
Inputs and outputs on XLR connectors
1U Rack mounting
24bit 120dB dynamic range ADC E.I.N
Front panel controls for easy access
Output 'shuffle' switch
Switchable high pass filter on each input
Audio & Design DMA2 Specifications
Analogue Input Section
Electronically Balanced Inputs(XLR-F)
Input Impedance
>10K
Input gain Range
80dB variable from -70dButo +10dBu (Mic to Line Levels)
High Pass Filtering
3rd order -3dBat100HZ
THD+N
0.003% at -20dBu mic operating Level.
Phantom
Internally generated 48Volts
Channel Metering
3 led Bar
AES DIGITAL Section
1 x Balanced External AES3 Sync input (XLR-F) 110R
1 x Balanced AES3 Transformer output (XLR-M) 110R
Output Level (loaded to 110)
5volts p-to-p
Output jitter
<0.5nS at 32kHz,44.1,48,96KHz
RemoteControl RS232
9-PinD-Sub for PC full remote control
Power
90-250V/45 65Hz, IEC fused inlet with on/off rocker switch
Fusetype
T3A
Dimensions (W x H x D)
482.60 x 44.45 x 153mm (19.00 x 1.75 x 6.02")
Weight
1.0kg (2.20lbs)